Welcome to TECKHME. PLC Control Builder AC 800M - an
effective but still easy to use programming tool. This manual is produced for
anyone intending to use the programming tool PLC Control Builder for the first
time. It is focused on getting you quickly started and acquainted with the
product. Therefore, as much 'in-depth' information as possible has been
separated from the main sections and placed in appendices instead. Consequently
you are advised to look up the appendices if you need to learn more about for
example upgrading projects, multi-user engineering or network redundancy.
If this is your first time working with a programming tool, it is recommended that you start by reading Section 1, Introduction and then work yourself through each section.
The sections are organized in this manner:
Section 1, Introduction, gives you a brief introduction to the document strategy and product overview.
Section 2, Installing PLC Software, helps you install a single user configuration that is, a PLC Control Builder and an OPC Server installed on the same PC machine.
Section 3, PLC Control Builder User Interface, explains the PLC Control Builder and its core interface Project Explorer.
Section 4, MyDoors Project, encourages you to build a small project example, and getting yourself acquainted with the Control Builder environment.
Section 5, Hardware Configuration, teaches you how to add or remove hardware units from the tree structure in the Project Explorer.
Section 6, Connecting the PLC and Go Online, starts with the prerequisites for connecting a PLC and then guide you through downloading a project and Go online.
The following conventions are used for the presentation of material:
• The words in names of screen elements (for example, the title in the title bar of a window, the label for a field of a dialog box) are initially capitalized.
• Capital letters are used for the name of a keyboard key if it is labeled on the keyboard. For example, press the ENTER key.
• Lowercase letters are used for the name of a keyboard key that is not labeled on the keyboard. For example, the space bar, comma key, and so on.
• Press CTRL+C indicates that you must hold down the CTRL key while pressing the C key (to copy a selected object in this case).
• Press ESC E C indicates that you press and release each key in sequence (to copy a selected object in this case).
• The names of push and toggle buttons are boldfaced. For example, click OK.
• The names of menus and menu items are boldfaced. For example, the File menu.
You can download the guide of ABB PLC For Beginners :